Magellan MG5000 Manuel d'installation télécharger pdf (Page 32)

28 Reference & Installation Manual

7.8 Restrict Arming on Wireless Supervision Trouble

Section [703]: Arming/Disarming Options

Option [7] OFF = Permit arming on wireless supervision failure (default)

Option [7] ON = Restrict arming on wireless supervision failure

If this option is enabled, the control panel will not arm the system if the control panel detects a wireless supervision trouble on one

or more zones. The control panel will not arm the system until all wireless supervision trouble conditions are rectified.

This feature will not function if the tamper recognition options (see Tamper Recognition on page 31) are disabled

or whenever the tampered zone is bypassed and the tamper bypass options (see Tamper Bypass Options on page

32) have been enabled.

7.9 Timed Auto-Arming

Section [741] = Partition 1, [742] = Partition 2

Option [1] OFF = Timed Auto-Arming Disabled (default)

Option [1] ON = Timed Auto-Arming Enabled

Each partition can be programmed to arm every day at the time specified by the Auto-arm Timer. The auto-arming options (see

Auto-Arming Options on page 29) determine the partition's arming method. Any open zones detected when a partition is auto-

armed will be bypassed regardless of their definition (except 24Hr zones). The control panel will enter a 60-second exit delay

period before arming the system. At this point, auto-arming can be cancelled by entering a valid access code. Once the partition

has successfully armed, the control panel can transmit the Timed Auto-arming report code programmed in section [860].

Example: To automatically arm partition 2 everyday at 6:15PM, enable Timed Auto-arming for partition 2 by turning on option [1]

in section [742]. Then key in 18:15 into section [762].

7.9.1 Auto-Arm Timer

Section [761] = Partition 1, [762] = Partition 2

Select the section corresponding to the desired partition and program the time (use the 24-hour clock i.e. 6:30PM =

18:30) that you wish the control panel to attempt to arm the selected partition and/or send the Late to Close report code.

7.10 No Movement Auto-Arming

Section [741] = Partition 1, [742] = Partition 2

Option [2] OFF = No Movement Auto-Arming Disabled (default)

Option [2] ON = No Movement Auto-Arming Enabled

If no movement occurs in a partition's protected area for the period specified by the No Movement Timer, the control panel can

automatically arm that partition. The Auto-arming Option determines the partition's arming method. Any open zones detected

when a partition is Auto-armed will be bypassed regardless of their definition (except 24Hr zones). Upon arming, the control panel

will transmit the No Movement report code if programmed in section [860]. Regardless of whether the system was successfully

armed or not, the control panel will always transmit the No Movement report code if programmed in section [860]. If No

Movement Auto-arming is disabled, the control panel will still send the No Movement report code at the time specified by the No

Movement Timer.

Example: To arm partition 1 whenever there is no movement for a period of 4 hours, enable No Movement Auto-arming for

partition 1 by turning on the [2] Option in section [741]. Then in section [749] enter 016 (16x15min = 240min = 4 hours).

7.10.1 No Movement Timer

Section [749] = Partition 1, [750] = Partition 2

000 to 255 x15min, Default = Disabled

Select the section corresponding to the desired partition and program the interval of time without movement you wish

the control panel to wait before arming and/or sending the No Movement report code. If No Movement Auto-arming is

disabled, the control panel can still send the No Movement report code when no movement has been detected for the

period specified by the No Movement Timer.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

Magellan MG5000 Manuel d'installation Page 32

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Magellan MG5000