Magellan MG5000 Manuel d'installation télécharger pdf (Page 17)

MG5000 13

4.5.6 Arm Only

Sections [404] to [432]: User Codes 004 to 032

Option [6] OFF = Arm Only Disabled (default)

Option [6] ON = Arm Only Enabled for selected User Code

The user code with this option enabled can arm assigned partitions, but cannot disarm any partitions. The type of

arming is dependent on the other User Code Options selected. Please note that with the Arm Only option, the user can

cancel a recently armed system by re-entering the access code before the end of the exit delay.

4.5.7 PGM Activation

Sections [404] to [432]: User Codes 004 to 048

Option

[7]

OFF = User Code follows User Code Options and can activate a PGM (default)

Option [7] ON = User Code can activate a PGM only

With option [7] off, entering the access code will arm or disarm according to the programmed User Code Options as

well as activate or deactivate a PGM. The appropriate PGM Activation/Deactivation Event must also be programmed

(see Programmable Outputs on page 40). With option [7] on, the control panel will ignore all other User Code Options.

Therefore, entering the access code will only activate or deactivate the PGM.

4.5.8 Duress

Sections [404] to [432]: User Codes 004 to 032

Option

[8]

OFF = User Code with duress disabled (default)

Option [8] ON = User Code with duress enabled

If you are coerced into arming or disarming your system, entering the access code with the duress option enabled will

arm or disarm the system and immediately transmit a silent alert (Duress Code) to the monitoring station.

4.6 Lock Master Code

Section [701]: System Options

Option [2] OFF = Lock System Master Code Disabled (default)

Option [2] ON = Lock System Master Code Enabled

With this feature enabled, the control panel will lock the System Master Code (001), it cannot be modified. With this feature

disabled, the control panel will unlock the System Master Code, so that it can be changed. The System Master Code cannot be

deleted (see Master Quick Menu Programming in the MG5000 User Guide).

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 55 56

Pas de commentaire

Magellan MG5000 Manuel d'installation Page 17