Magellan MobileMapper - GPS Software Spécifications télécharger pdf (Page 43)

English

Direct IP

Warning! Using Direct IP requires that you have previously fol-

lowed the entire procedure described in Step-by-Step Proce-

dure for Establishing a GPRS Connection Via Bluetooth on

page 18.

Important Notice! Once you are familiar with the GPRS connec-

tion procedure described on page 18, you don’t need to accu-

rately follow this procedure. Instead, make your Bluetooth and

GPRS connections directly from within the DGPS Configura-

tion utility, using the following buttons located on the Direct

IP Settings window:

- for Bluetooth Manager

- for GPRS

Assuming the GPRS connection is now active, do the follow-

ing to implement the Direct IP DGPS mode:

- Tap on , then Programs>GPS Utilities>DGPS Configuration.

- Tap on the Select Mode button.

- In the Select Differential Mode window, enable the Direct

IP option.

- Tap OK. The Direct IP Settings window opens in which you

can store several Direct IP configurations. [With an already

active GPRS connection, note that the Bluetooth and Dial-

Up fields have been filled in accordingly.].

Each Direct IP configuration holds the key information

allowing MobileMapper CX to connect to a given correc

tions provider. Having the capability to save several Direct

IP configurations in MobileMapper CX will therefore allow

you to quickly change the corrections provider without

having to re-enter the relevant connection parameters

each time you do that.

- To enter your first Direct IP configuration, tap

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 85 86

Pas de commentaire

Magellan MobileMapper - GPS Software Spécifications Page 43