Magellan MG5000 Guide de l'utilisateur télécharger pdf (Page 22)

20 User Guide

Partition

It is possible to arm or disarm specific partitions. The partitions must be prefaced by the letter A, and separated

by commas for individual partitions. It is also possible to affect a series of partitions by writing TO between the

start and end partitions of that series. The list of partitions must be followed by a period.

Examples:C1234.ARM.A1.

C1234.ARM.A1TO2.

Phone Number

This informs the system of which phone number must be notified by SMS to confirm the status change.

Example:C1234.ARM.A1,3,5TO7.5555551234

IP Information

It is possible to receive the IP address of the GSM module via text message. The GSM module will then send a

text message to the specified phone number displaying the IP address of the GSM module. A valid user code

must be entered to receive the IP address. The IP address can be used to configure remote software. Consult

your installer for more information.

Example:C1234.IP.5555551234

GSM Module Phone Number

Enter the phone number of your GSM module here (consult your cell phone provider)

__________________________________________

Communicating by Phone

(Voice-Guided VDMP3)

You can communicate with your security system by phone by using a system accessory called the VDMP3

Voice Dialer (sold separately). The VDMP3 is a module that can be programmed to call one or more telephone

numbers in the event of an alarm. For example, when an alarm occurs at your store during off-hours, every

employee can receive notification via telephone: (sample message) “Area 1 in alarm. Zone 3. Press 1 to disarm

the system...”

You can also call the VDMP3 from an outside line, enabling you to arm or disarm the system as well as activate

PGMs. The VDMP3 essentially turns any outside telephone into a keypad. For example, you unexpectedly have

to extend a business trip, and for security reasons, would like to turn on your office’s lighting. Simply use your

phone to toggle the lights on and off. Consult your installer for more information.

VDMP3 Instructions

Refer to the following page for a diagram that details how to use the VDMP3.

How do I call the VDMP3?

Connected to an answering machine:

1 From an outside line, dial the telephone number to which the VDMP3 is connected.

2 When the line rings, hang up the telephone.

3 When the VDMP3 answers the line, you are prompted to enter your user code.

4 Options are given to arm/disarm (1) and control features (PGMs) (2).

Not connected to an answering machine:

1 From an outside line, dial the telephone number to which the VDMP3 is connected.

2 When the VDMP3 answers the line, you are prompted to enter your user code.

3 Options are given to arm/disarm (1) and control features (PGMs) (2).

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Pas de commentaire

Magellan MG5000 Guide de l'utilisateur Page 22