Magellan DIY Guide d'installation télécharger pdf (Page 5)

www.diysecurity.co.za

Figure 1

• The “dead spot”, or area where the RF signal is weak or non-existent, varies from one transmitter to the next

• Mounting the receiver as central as possible to the transmitters will help in avoiding the “dead spots”

• Do not mount the transmitters too close to each other. Do not mount the transmitters too far or too close to the

receiver.

• When RF devices are too close, strong RF signals can cause the devices to malfunction (Intermodulation)

• When a transmitter is mounted too far from the receiver, the RF signal is too weak to communicate effectively

or at all.

• As a general rule, when installing transmitters ensure that there is at least 30cm (1ft) between each transmitter,

and at least 1.5m (5ft) between each transmitter and the receiver

• The maximum distance that a transmitter can be from the receiver is dependant on the transmitter’s transmis-

sion range

Magellan 6160 Console Radio Connection

DIYSECURITY.CO.ZA

1 2 3 4 5 6 7 8 9 10 ... 20 21

Pas de commentaire

Magellan DIY Guide d'installation Page 5