Magellan SmartGPS Manuel d'utilisateur télécharger pdf (Page 21)

www.magellangps.com

Instructions

Syncing to MiCloud with Wi-FI

Connecting to a Wi-Fi Network

You need to initially connect to a Wi-Fi network before you can access it. Once you have

successfully connected, the information for connecting to the network is stored in the Magellan

SmartGPS and it automatically connects to the network when in range.

1. From the Map screen press

2. Tap on the Wi-Fi button.

3. The device will begin searching for

networks in the immediate area that

are broadcasting.

4. A list of networks are shown. Select

the network you want to connect to

and tap Connect.

5. If the network has security protection

(indicated by the icon), you will need

to enter a password. Contact the

network administrator if you do not

know the password.

6. The device will communicate with the network, authorizing and obtaining an IP address.

When that is successful, the device will indicate that the network is connected.

Connecting to a Non-Broadcasting Wi-Fi Network

Some networks are configured to not broadcast the SSID for the network. In this case the

network will not be displayed in the list of available networks. Follow these instructions to

connect to a non-broadcasting network.

1. From the Map screen press

2. Tap on the Wi-Fi button.

3. Tap Add Network.

4. Enter the name of the network. Contact the network administrator if you do not know the

name of the network, the network security type and the password.

5. Tap on Security Open>.

6. Tap on Open, WEP or WPA/WPA2 PSK to select the type of security used.

7. Enter the password for the network.

8. With the name and security set, tap on Join.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 63 64

Pas de commentaire

Magellan SmartGPS Manuel d'utilisateur Page 21